How to clean the carburetor of a brush cutter?

It is important to take care and make a maintenance its brush cutter and therefore clean the carburetor. The carburetor needs to be dismantled and cleaned regularly, otherwise you will experience some difficulties when maintaining your green spaces. Engine is a fragile element with a very precise dosage between injected gasoline and air. This is why it is a step that quickly becomes essential and even if you do not know anything, it will suffice to follow the guide which adapts perfectly to the different brands of brushcutter on the market such as Bosh, Makita, GT Garden, Einhell, Timberpro or Nemaxx.

When and why should the carburetor be cleaned?

When the season is in full swing to maintain these green spaces, the use of the brush cutter is a must. But when you turn it on you notice thatshe tends to speed up or the family contrary to stall. Yet the last time you used your device there was no sign of weakness. Don't worry, this is a sign that you need to clean your carburetor to check that your engine is working properly. Some usual checks that will only take a few minutes and which will allow you to maintain your garden in peace. It is normal for this type of inconvenience to occur to you, but thanks to this guide, you will be able to remedy this problem very easily by following the various steps indicated.

Keep in mind that when working on your brush cutter, it is important to clean the carburetor with the unit completely off to avoid injury. Also remember to use gloves to avoid small cuts and minor inconveniences due to handling mechanical parts.

How to clean the carburetor of a brush cutter?

If you are not a DIY expert, it is a good idea to take a few photos at each step to make it much easier to reassemble the carburetor. Once this is done, you will be able to clean the corresponding part step by step.

Carburetor cleaning guide

To start, disassemble all the parts of your brushcutter to reach the carburetor. Usually this is made up of air filter, several gas cables, but also metal linkages.

Once you have been able to evacuate all the parts, you can safely remove it and lay it on a clean, flat surface to make your work much easier.

Rest assured, by this time you have almost completed the dismantling phase of your device. Carefully remove the carburetor bowl which will allow you to access other mechanical parts called the jets. Take a clean container in which you can empty the excess gasoline. Don't be surprised at the amount as there can be several tens of milliliters depending on the size of your equipment.

At this step, you should focus on cleaning the sprinkler, it is an essential part which makes it possible to charge gasoline but unfortunately it clogs very easily which can cause problems to feed the engine. This is a screw drilled on a very fine structure that you must locate. Gently loosen the screw to access the nozzle and depending on the model of your brushcutter, there may be several. Clean with finesse using a sponge or a cloth but never a metallic object under penalty of damaging the jets.

Other parts to clean or move when servicing the carburetor

Some brushcutter models are equipped with a removable fuel filter. Cleaning it is absolutely essential by following the exact same process as for cleaning the jets.

The other parts that accompany the carburetor such as the bowl or the float can also be cleaned to remove all traces of gasoline present on these elements. Cleaning these items is a necessary operation that you have accomplished brilliantly if you have arrived at this stage. All you have to do is reassemble the pieces by relying on the various photos you may have taken beforehand.

Which product to clean a carburetor and where to buy it?

Some specific products exist for clean your brush cutter. During the various operations that you have carried out to dismantle your equipment, it is possible to remove more deposit by using a specific cleaner.

Available as a spray can or as a container, it is highly recommended to use it for periodic cleaning. The advantage is that with this product you can directly use it both outside and inside the carburetor.

Its effectiveness is particularly emphasized because the cleaning product eliminates all gasoline deposits on mechanical parts. It will also reduce the emission of polluting gases and further dissolve the various gasoline deposits inside the mechanical parts to be dismantled. This will allow you to take good care of your brush cutter. All you need to do is use the appropriate product, following the steps described above.